Toshiba Satellite Pro 4320 - Manual (Page 89)

User's Manual Setup and Password Security 7-1
Version
1
Last Saved on 27/01/00 18:20
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as IM_420UK
Chapter 7
Setup and Password Security
This chapter explains how to use TSETUP to configure your computer and
how to set security passwords.
When you configure the computer, the computer stores your selected
values in memory that is backed up by the internal Real Time Clock (RTC)
battery.
If the RTC battery fully discharges, configuration data is lost. A checksum
error is displayed when you start the computer and the system
configuration returns to default values. To charge the RTC battery, connect
the AC adaptor and turn on the computer’s power. The RTC battery does
not charge when the computer is turned off.
TSETUP
TSETUP is an MS-DOS-based program that provides similar functions to
Hardware Setup and Power Saver Utility. Settings for the HDD Mode, CPU
cache and level 2 cache explained in this chapter, cannot be made in
Hardware Setup. The SYSTEM SETUP screen is displayed when you
execute the file TSETUP.EXE, which is stored in the Windows subdirectory
on your hard disk.
If the supervisor password is set and you log onto the computer with the
user password, you cannot access the TSETUP program.