Toshiba Satellite Pro 4320 - Manual (Page 139)

User's Manual Optional Devices 8-27
Version
1
Last Saved on 27/01/00 18:20
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as IM_420UK
Front
The illustration below shows the Port Replicator’s front.
METAL LATCHES
COMPUTER
CONNECTOR
FINGER GRIP
GUIDE RAILS
FINGER GRIP
EJECT LEVER
VOLUME CONTROL
ENGAGING PIN
(NOT SHOWN)
ENGAGING PIN
(NOT SHOWN)
EJECT LEVER RELEASE BUTTON
The front
Computer connector This is the computer interface. It connects directly
to the computer’s docking interface port.
Finger grips Use these grips to steady the Port Replicator as you
push the computer forward with your thumbs.
Guide rails These rails guide the computer to a proper
connection with the Port Replicator.
Metal latches These latches engage slots on the bottom of the
computer to hold it securely to the Port Replicator.
Eject lever release
button Press this button when you pull the elect lever to
disconnect the Port Replicator.
Engaging pins These pins engage holes on the computer to
secure the connection.