Toshiba Satellite Pro 4320 - Manual (Page 87)

User's Manual Power and Power-Up Modes 6-13
Version
1
Last Saved on 27/01/00 18:20
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as IM_420UK
Hotkeys
You can use hotkeys Fn + F3 to set the power-up modes. See Chapter 5,
The Keyboard , for details.
TSETUP
You can use the MS-DOS-based utility TSETUP to set two power-up
modes: Resume and Boot. See Chapter 7,
Setup and Password Security ,
for details.
The Resume mode is called Suspend/Resume in Windows 95 and
Standby
in Windows 98. The functions are essentially the same.
Panel power off
You can set up your computer so that power turns on automatically when
you open the display panel and turns off when you close it.
Refer to Special Features, in Chapter 1, Introduction , for an explanation of
how to enable this convenient feature.
If you use the Suspend or Standby button in the Windows Shut Down
menu to turn off the computer, do not close the panel until the suspend
function is completed. If you close the panel before the suspend function is
completed, Resume will not work.
System auto off
This feature turns the system off automatically if it is not used for a
set duration.
Refer to Special Features, in Chapter 1, Introduction , for an explanation of
how to set the duration.
Auto Power On
This feature lets you set a time for the system to turn on automatically.
Refer to Special Features, in Chapter 1, Introduction , for an explanation of
how to set the power on timing.