Toshiba Satellite Pro 4320 - Manual (Page 102)

7-14 Setup and Password Security User's Manual
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as IM_420UK
When the Parallel Port Mode (see settings below) is set to ECP, the DMA
channel can also be set to 1 or 3. The default is 3.
LPT setting I/O address Interrupt level DMA Channel
LPT 1 378H 7 3 (Default)
LPT 2 278H 5 3
LPT 3 3BCH 7 3
Not Used (Disables port)
Others (Other settings made automatically by
plug-and-play operating systems)
PCI bus
It is for information only and cannot be changed. It appears only in TSETUP.
PCI BUS = IRQ** (Interrupt level is displayed.)
PC Card
This option lets you set the PC Card Controller mode.
PC Card Controller Mode
This option lets you set the PC Card Controller mode.
Auto-Selected Use this setting for all PC Cards if you are using
a plug-and-play operating system. (Default)
CardBus/16bit If the card does not work properly with the Auto-
Selected setting, use this setting for CardBus PC
Cards.
PCIC Compatible If the card does not work properly with the Auto-
Selected and CardBus/16bit settings, use this
setting for 16-bit PC Cards.
When Device Config is set to Setup by OS, you must set the PC Card to
Auto-Selected.