Toshiba Satellite Pro 4320 - Manual (Page 95)

User's Manual Setup and Password Security 7-7
Version
1
Last Saved on 27/01/00 18:20
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as IM_420UK
USB Legacy Emulation
Use this option to enable or disable USB Legacy Emulation. If your
operating system does not support USB, you can still use a USB mouse
and keyboard by setting the USB Legacy Emulation item in TSETUP
to Enabled.
USB Legacy Emulation = Disabled (Default)
= Enabled
Parallel Port Mode
This tab lets you set the Printer Port type. Use the Windows Device
Manager to make settings for the Parallel port.
Printer Port Type
The options in this tab are ECP and Standard Bi-directional.
ECP Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to ECP. (Default)
Standard
Bi-directional This setting should be used with some other parallel
devices.
Hard Disk Mode
Use this item to select the hard disk mode. The hard disk mode can be set
only in TSETUP.
Formats for Enhanced IDE and Standard IDE are different, so if you
change the setting, you will have to reformat the hard disk for the
appropriate setting.
Enhanced IDE
(Normal) Select this mode when using MS-DOS,
Windows 95/98 or Windows NT. (Default)
Standard IDE Select this mode when using an operating
system that does not support Enhanced IDE. If
this mode is selected with MS-DOS, up to
504 MB is logically available even though the
disk’s capacity is larger than 504 MB.