Toshiba Satellite Pro 4320 - Manual (Page 136)

8-24 Optional Devices User's Manual
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as IM_420UK
Installing and removing PC Cards
The Card Station III has two PC Card Slots, one on either side, that each
accommodate one Type II or one Type III card.
To install a PC Card, follow the steps below.
1. Turn off the computer if it is connected.
2. A pair of flaps protects the PC Card Slot. Insert the PC Card through
these flaps.
Installing a card in the Card Station III
3. When the card is almost fully seated, you will feel some resistance.
Press gently to assure a firm connection, but do not force the card into
position.
Before you turn on the power to the computer, make sure it is in boot mode.
4. Set the lock for the appropriate PC Card. For the left side, slide the
lock toward the front of the Card Station III. For the right side, turn the
key lock 180 degrees.
If you connect a security cable to the Card Station III, the PC Card lock will
be blocked, preventing removal or installation of a PC Card. To remove or
install a PC Card, first remove the security cable.