Toshiba Satellite Pro 4320 - Manual (Page 134)

8-22 Optional Devices User's Manual
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as IM_420UK
Connecting the spacer to the Card Station III
This section describes connection of the spacer to the Card Station III.
1. Make sure the engaging pins on the Card Station III are down (pull the
release lever forward).
2. Seat the spacer between the guide rails on the Card Station III.
Connecting the spacer
3. Hold the Card Station III and spacer together on each side and slide
the spacer forward with your thumbs.
4. Remove the rubber cover from the computer’s Docking Interface port,
and set the computer lock on the bottom of the spacer to the unlock
position.
5. Make sure the engaging pins are down (pull the release lever forward).