Pioneer ANH-P10MP - Manual (Page 99)

13
Section
Other Functions
99
En
English
Using the muting/
attenuation and hands free
telephoning function
Navigation guidance muting/
attenuation function
When the navigation outputs the guidance
voice, the audio volume is muted or attenuat-
ed.
— When “ MUTE” or “ATT” is selected in the
mute setting. (Refer to Switching the mut-
ing/attenuation setting on page 92.)
— When “ OFF” is selected in the hands free
telephoning setting. (Refer to Switching
the hands free telephoning on page 95.)
If “ ON” is selected in the hands free telephon-
ing setting, both the audio volume and the
navigation guidance voice are muted or atten-
uated when a call is made or received.
Muting/attenuation function
When a mute signal has been received from
the yellow/black lead connected to this prod-
uct, the audio volume is muted or attenuated.
This function is activated in the following con-
dition:
— When “ MUTE” or “ATT” is selected in the
mute setting. (Refer to Switching the mut-
ing/attenuation setting on page 92.)
— When “ OFF” is selected in the hands free
telephoning setting. (Refer to Switching
the hands free telephoning on page 95.)
• The sound is turned off, “ MUTE” is dis-
played and no audio adjustments are pos-
sible.
• The sound is attenuated, “ ATT” is dis-
played and no audio adjustments, except
volume control, are possible.
• Operation returns to normal when the
phone connection is ended.
• The guidance voice of navigation isn’t mut-
ed or attenuated when a call is made or re-
ceived.
Hands free telephoning func-
tion
When a call is made or received using a
hands free telephone unit, the source chang-
es to the TEL source and sound from this sys-
tem is muted automatically. The voice of the
person you talk to comes from the speakers.
This function is activated in the following con-
dition:
— “ ON” is selected in the hands free tele-
phoning setting. (Refer to Switching the
hands free telephoning on page 95.)
• When a call is made or received, no source
change is possible.
• When a call is made or received, only two
adjustments (volume and fader/balance)
are possible.
• Operation returns to normal when the
phone connection is ended.
• Telephone standby can be selected as a
source when “ ON” is selected in the tele-
phone standby setting. (Refer to Switching
the telephone standby on page 96.)
• Only when “ TEL 1” is turned on, the guid-
ance voice of navigation will be muted or
attenuated.
• When “ TEL 1” is turned on, neither
“ MUTE” nor “ATT” is displayed.