Multi-cd player playing a cd – Pioneer ANH-P10MP User Manual
Page 69
08
Section
69
En
English
Multi-CD Player
Playing a CD
You can use this product to control a multi-CD
player, which is sold separately.
More advanced CD operation is explained in
Advanced multi-CD player operation starting
on page 70.
Disc number indicator
Shows the disc currently playing.
Track number indicator
Shows the track currently playing.
Play time indicator
Shows the elapsed playing time of the cur-
rent track.
Disc title (if exists)
Shows the title of the disc currently playing.
Track title indicator (if exists)
Shows the tittle of the track currently play-
ing.
1
Press SOURCE until “Multi-CD” ap-
pears.
2
Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3
Press or to select a disc.
Disc number for which no disc exists will be
skipped.
You can use the buttons
1 – 6 (or 7 – 12) to
select a disc directly.
4
To perform fast forward or reverse,
press and hold or .
5
To skip back or forward to another
track, press or .
Pressing
skips to the start of the next track.
Pressing once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
• When the multi-CD player performs the pre-
paratory operations, “
Ready” is displayed.
• If the multi-CD player does not operate prop-
erly, an error message such as “
ERROR-11”
may be displayed. Refer to
built-in CD player error messages on page 100.
• If there are no discs in the multi-CD player
magazine, “
No disc” is displayed.
• When you select a disc which title has been
entered, the disc title automatically begin to
scroll on the display.
• When you select a CD TEXT disc on a CD
TEXT compatible multi-CD player, the disc
and track titles automatically begin to scroll
in the display.
When Ever-scroll is set to ON at the initial set-
ting, the disc and track titles scroll continu-
ously. About Ever-scroll, refer to
• After choosing your destination, press
INFO
and you can listen to the guide voice during
navigation guidance.