Playing an audio cd, Before you start – Pioneer ANH-P10MP User Manual
Page 17
01
Section
Before You Start
17
En
English
7
Rotate VOLUME to increase or de-
crease the volume.
You can adjust the volume of the guidance
voice of the Navigation System while naviga-
tion announcement are being made.
•
Clockwise:
Increasing the volume
•
Counter-clockwise:
Decreasing the vol-
ume
Never set the volume of your Navigation
System so high that you cannot hear outside
traffic and emergency vehicles.
Set your
destination by repeating the above
operations. After the destination have been
set and the route has been calculated, the
Navigation System starts giving route guid-
ance. Refer to
Notes
• During the calculation,
flashes on the dis-
play. Once the calculation has been complet-
ed,
extinguishes, you can remove the
navigation CD and insert an audio CD.
• After setting your destination, wait for
(calculation in progress) to disappear before
starting the vehicle.
Playing an audio CD
This section describes how to use the built-in
CD player. For details or audio-related func-
tions, refer to each section (section 03 to sec-
tion 11) from page 44.
1
Press OPEN to open the front panel.
CD loading slot appears.
2
Remove the navigation CD.
If the navigation CD has not been inserted,
proceed to step 3.
3
Insert a CD into the CD loading slot.
Reading of the disc starts.
4
Close the front panel.
5
When the Navigation screen is shown,
press SOURCE to enter the Audio mode.
CD loading slot
button
SOURCE button