Pioneer ANH-P10MP - Manual (Page 58)

Built-in CD Player
En
06
Section
58
Repeating play
Repeat play lets you hear the same track over
again.
1 Press FUNC to select the repeat mode.
2 Press RPT to turn the repeat play on.
The light illuminates. The track currently play-
ing will play and then repeat.
Press RPT again to turn repeat play off.
Notes
• If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
• When the repeat mode is exited while repeat
play is on, “ RPT” appears on the basic dis-
play.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNC and then press RDM to se-
lect the random mode.
2 Press RDM to turn random play on.
The light illuminates. Tracks will play in a ran-
dom order.
Press RDM again to turn random play off.
Note
When the random mode is exited while random
play is on, “
RDM” appears on the basic dis-
play.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNC and then press SCAN to se-
lect the scan mode.
2 Press SCAN to turn scan play on.
The light illuminates. The first 10 seconds of
each track are played.
3 When you find the desired track, press
SCAN to turn scan play off.
The light goes off. The track will continue to
play.
If the scan mode is automatically cancelled,
select the scan mode again.
Notes
• After scanning of a CD is finished, normal
playback of the tracks will begin again.
• When the scan mode is exited while scan
play is on, “ SCAN” appears on the basic dis-
play.