Pioneer ANH-P10MP - Manual (Page 48)

Tuner
En
04
Section
48
Advanced tuner operation
Tuner function menu
The tuner function menu has the following
functions:
BSM (best stations memory)
LOC (local seek tuning)
AF (alternative frequencies search)
PTY (programme type selection)
REG (regional)
FM
MW/LW
1 Press FUNC to display the function
menu.
2 To return to the frequency display,
press BAND/ESC.
If MW/LW band is selected, you can only se-
lect “ BSM” or “LOC”.
Note
• “ AF”, “PTY” and “REG” are RDS functions
for FM bands. See Selecting alternative fre-
quencies on page 51 , Using PTY functions
on page 53 and Limiting stations to regional
programming on page 52 .
• If you do not operate the function within
about 30 seconds, the display is automatical-
ly returned to the frequency display.
Storing and recalling
broadcast frequencies
You can easily store up to six broadcast fre-
quencies for later recall with the touch of a
button.
1 Find a frequency that you want to
store in memory.
2 Press NEXT until “1” - “6” appears.
3 Press a preset tuning button 1 – 6 and
hold until the preset number stops flash-
ing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
4 Press the same preset tuning button 1
– 6.
The radio station frequency is recalled from
memory.
Notes
• This product’s AF (alternative frequencies
search) function can be turned on and off. AF
should be off for normal tuning operation (re-
fer to
Selecting alternative frequencies on
page 51).
• Up to 18 FM stations, 6 for each of the three
FM bands, and 6 MW/LW stations can be
stored in memory.
• You can also use and to recall radio sta-
tion frequencies assigned to preset tuning
buttons
1 – 6.