Pioneer ANH-P10MP - Manual (Page 95)

12
Section
Initial Settings
95
En
English
Selecting the illumination
colour
This product is equipped with two illumination
colours, green and red. You can select the de-
sired illumination colour.
1 With the source turned off, press and
hold 1.
2 Press NEXT and then press D.ILM to se-
lect the illumination colour.
3 Press D.ILM to select the desired illumi-
nation colour.
• Each press of D.ILM switches the illumina-
tion colour between red or green and that
status will be displayed (e.g.,
GREEN).
Switching the auto PI seek
This product can automatically search for a
different station with the same programme,
even during preset recall.
1 With the source turned off, press and
hold 1.
2 Press NEXT and then press A.PI to se-
lect the auto PI seek mode.
3 Press A.PI to turn the auto PI seek on.
“ ON” appears in the display.
Press A.PI again to turn the auto PI seek
off.
Switching the hands free
telephoning
You can turn the hands free telephoning on or
off in accordance with the connection of the
cellular telephone you use. When using the
hands free telephone unit (sold separately),
turn the hands free telephoning on. This prod-
uct automatically changes to the telephone
mode and mutes the audio volume and the
navigation guidance volume, when a call is
made or received.
Refer to
Hands free telephoning function on
page 99.
1 With the source turned off, press and
hold 1.
2 Press NEXT until “TEL 1” appears.
3 Press TEL 1 to select the hands free set-
ting mode.
4 Press TEL 1 to turn the hands free tele-
phoning on.
“
ON” appears in the display.
Press TEL 1 again to turn the hands free tele-
phoning off.