Selecting the wall paper pattern, Using the aux source, Selecting aux as the source – Pioneer ANH-P10MP User Manual
Page 98: Setting the aux title, Using different entertainment displays, Other functions

Other Functions
En
13
Section
98
3
Press DMMER to turn the dimmer on.
“
ON” appears on the display.
Press
DMMER again to turn the dimmer
off.
Selecting the wall paper
pattern
There are three patterns to choose from.
1
Press NEXT until “C.MENU” appears.
2
Press C.MENU and then press PTRN to
select the wall paper pattern mode.
3
Press a corresponding button to select
the desired pattern.
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) ena-
bles you to connect this product to auxiliary
equipment featuring RCA output. For more
details, refer to the IP-BUS-RCA Interconnec-
tors Owner’s manual.
Selecting AUX as the source
Press SOURCE until “AUX” appears in
the display.
If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see
ing the auxiliary setting on page 92.
Setting the AUX title
The title displayed for the AUX source can be
changed.
1
After you have selected AUX as the
source, press FUNC.
2
Press TTLin to select the AUX title in-
put mode.
Refer to
Entering disc titles on page 60, and
perform procedures 4 to 7 in the same way.
Note
Even if you do not press
TTLin you can enter the
title. In this case, you will not be able to change
the character types.
Using different
entertainment displays
You can enjoy entertainment displays while
listening to each sound source.
1
Press ENT.
2
Press the corresponding button to se-
lect the desired display.
Display
Setting
E.CLK
Entertainment clock
BGP 1
Background picture 1
BGP 2
Background picture 2
BGP 3
Background picture 3
BGP 4
Background picture 4
OFF
Entertainment clock display off