Pioneer ANH-P10MP - Manual (Page 61)

06
Section
Built-in CD Player
61
En
English
4 Press ABC to select the desired charac-
ter type.
Press
ABC repeatedly to switch between the
following character type:
Alphabet (upper case)—Alphabet (lower
case)—European letters, such as those with
accents (e.g.
б, а, д, з)
You can select to input numbers and symbols
by pressing 012.
5 Press or to select a letter of the al-
phabet.
Each press of will display a letter of the al-
phabet in
A B C ... X Y Z, numbers and sym-
bols in 1 2 3 ... @ # < order. Each press of
will display a letter in the reverse order, such
as
Z Y X ... C B A order.
6 Press to move the cursor to the next
character position.
When the letter you want is displayed, press
to move the cursor to the next position and
then select the next letter. Press to move
backwards in the display.
7 Move the cursor to the last position by
pressing after entering the title.
When you press one more time, the entered
title is stored in memory.
8 Press BAND/ESC to return to the play-
back display.
Notes
• Titles remain in memory, even after the disc
has been removed from this product, and are
recalled when the disc is reinserted.
• After the titles for 48 discs have been entered,
the data for a new disc will overwrite the old-
est one.
Switching and scrolling the
title
When playing a CD TEXT disc, you can switch
text display such as artist name and track ti-
tle. You can also scroll the text.
1 Press TITLE to switch the title mode.
2 Press the corresponding button to dis-
play the desired title.
Notes
• A CD TEXT disc is a CD featuring recorded
text information such as disc title, artist name
and track title.
• If you do not operate the function within
about eight seconds, the display is automati-
cally returned.
• The titles are displayed up to 24 letters long.
• If specific information has not been recorded
on a CD TEXT disc, “ No XXXX” will be dis-
played (e.g., No artist name).
• If you have not input disc titles, “ No title” is
displayed.
• When Ever-scroll is set to “ ON” at the initial
setting, CD text information scrolls continu-
ously in the display. If you want to stop the
scrolling display for the disc loaded, press
TI-
TLE and then press SCROLL. Just the first 24
characters of the text will be shown in the dis-
play. To switch off Ever-scroll completely, set
Ever-scroll to “
OFF” at the initial setting. To
turn Ever-scroll setting on or off, refer to
Switching the Ever-scroll on page 96.
Button Operation
TTL1 Displays disc title and track title.
TTL2 Displays disc title and disc artist
name.
TTL3 Displays track title and track artist
name.
SCROLL Scrolls the displayed title.