Pioneer ANH-P10MP - Manual (Page 44)

En
03
Section
44
Using Audio Source
Turning source on or off,
and selecting a source
You can select the source you want to listen
to. To switch to built-in CD player, load a CD in
this product. (Refer to
Playing an audio CD on
page 17.)
1 Press SOURCE to select the desired
source (e.g., tuner).
Press SOURCE repeatedly to switch between
the following sources:
Compact Disc (Built-in CD player)—Televi-
sion (TV tuner)—Tuner (Radio)—DAB (Digital
Audio Broadcasting)—
Multi-CD (Multi-CD
player)— External1 (External unit 1)—
External2 (External unit 2)—AUX (Auxilia-
ry)—
TEL (Telephone)
2 Raise or lower the volume.
Rotating the VOLUME adjusts the volume lev-
el.
• Rotate clockwise to raise the volume
level.
• Rotate counterclockwise to lower the
volume level.
3 Press and hold SOURCE to turn the
source off.
Notes
• External unit refers to a Pioneer product
(such as one available in the future) that, al-
though incompatible as a source, enables
control of basic functions by this product.
Two external units can be controlled by this
product, although “
External” is displayed
whether you select external unit 1 or external
unit 2. When two external units are connect-
ed, the allocation of them to external unit 1 or
external unit 2 is automatically set by this
product.
• In the following cases, the sound source will
not change:
* When no product corresponding to the
source is connected to this product.
* No audio disc is set in this product.
* No magazine is set in the multi-CD player.
*
AUX (auxiliary setting) is set to off. (Refer
to
Switching the auxiliary setting on
page 92.)
* When the telephone standby is set to off.
(Refer to Switching the telephone standby
on page 96).
• When this product’s blue/white lead is con-
nected to the vehicle’s auto-aerial relay con-
trol terminal, the vehicle’s auto-aerial extends
when this product’s source is switched on.
Example of multi-function but-
ton operation
Here the “random play” function of the built-in
CD player is used as an example to illustrate
operation of the multi-function buttons.
1 Press NEXT repeatedly until “FUNC”
appears.
2 Press FUNC to enter the function
menu.
With the switch to the function menu, the
functions of the multi-function buttons also
change simultaneously.
3 Press RDM to select the random mode.