Konica Minolta BIZHUB 223 - Manual (Page 242)

bizhub 423/363/283/223 8-29
8.3 Administrator Settings 8
This function overwrites and deletes all data in the total capacity of the SSD.
0 This function is available when disposing of this machine. Before performing this function, be sure to
consult your service representative.
0 While overwriting and deleting data, do not turn the main power switch off and on.
%
To perform the overwrite and delete function, press [Yes]
Overwrite and delete processing is performed after this machine has been rebooted.
HDD Lock Password
You can specify the password to lock the HDD.
0 Be sure to keep the specified password carefully so that you will never forget it. Forgetting the pass-
word will require a large amount of recovery work.
%
Specify the password, and reboot this machine.
The HDD password is specified.
Reference
- Enter the HDD password using 20 characters. Note that all the characters must not be the same.
- If you have already specified the HDD password, [Change] and [Release] appears. You can change or
release the HDD password.
This function is available only when a Hard Disk is installed.