Asante Technologies 8000 - Manual (Page 83)

User Interface Configuration
Page 3-49
2
Type c to clear the current System Log.
New entries will begin to accrue as events occur.
User Interface Configuration
The User Interface Configuration Menu lets you set the idle time-out periods
for both the console and telnet user interfaces, change the password used for
logging in to the Local Management Interface, and enable or disable the Web
server.
To display the User Interface Configuration Menu, as shown in Figure 3-28,
type u in the Configuration Menu.
Figure 3-28 User Interface Configuration Menu
Current Settings
Table 3-13 describes the settings in the User Interface Configuration Menu.
Setting Description
Console UI Idle Time-
out Duration of time the console will remain idle before returning
to the Main Menu.
Telnet UI Idle Time-out Duration of time the console will remain idle before closing the
Telnet connection.
IntraCore 8000 User Interface Configuration Menu
Console UI Idle Time Out 5 min
Telnet UI Idle Time Out 5 min
HTTP Server Status: ENABLED
Telnet Session Status:
Session Status Source IP
1 Active 192.168.54.240
2 Inactive
3 Inactive
4 Inactive
c Set Console UI Time Out
t Set Telnet UI Time Out
p Change Administrator Password
o TOggle to Enable/Disable HTTP Server
q Return to previous menu
Command>