Asante Technologies 8000 - Manual (Page 127)

VLAN Management
Page 4-37
3
Once you select a VLAN, type a. Then enter the module
and port to assign to the VLAN. You specify module and
port separated by a colon. For example, 1:8 assigns port 8
of module 1.
4
Repeat steps 2 and 3 for each VLAN that is part of the
ISL.
Configuring Tagging for the ISL Port on Each VLAN
You specify tagging for a port in the Advance Group Static Configuration
Menu.
1
Type v in the Configuration Menu to access the VLAN
Management Menu, then type s to access the VLAN
Group Static Configuration Menu.
2
Use the commands on the bottom of the menu to select
the VLAN you want.
3
Type v to display the Advance Group Static Configura-
tion Menu.
4
Type d, then enter the module and port description for the
ISL port. This removes the port from the VLAN’s
untagged set.
Configuring the ISL Port to Receive Tagged Frames
You configure a port to receive tagged frames in the VLAN Port
Configuration Menu.
1
Type v in the Configuration Menu to access the VLAN
Management Menu, then type p to access the VLAN Port
Configuration Menu.
2
Use the commands on the bottom of the menu to select
the module and port you want.
3
To toggle the port between receiving all frames and
receiving only tagged frames, from the VLAN Port Con-
figuration Menu, type t.