Asante Technologies 8000 - Manual (Page 17)

Defaults and Specifications
Page 1-9
Defaults and Specifications
The IntraCore 8000 is shipped with the following factory default settings
and specifications:
Table 1-3 Defaults and Specifications
Configuration Default Setting
Backplane Speed 16Gbps/stack unit, up to 80Gbps in a 4 unit stack.
Switching Method Store-and-forward
Forwarding Rates:
(64 byte packets) Switched 10Mbps = 14,880 pps
Switched 100Mbps = 148,810 pps
Switched 1000Mbps = 1,488,100 pps
Buffer Size 4MB
MAC Address Table 8K
Full-Duplex Standards based Auto-negotiation enabled
VLAN 64 port-based VLANs, GVRP support, 802.1Q VLAN Tagging
Spanning Tree Protocol 802.1D, enabled
Flood Rate Limiting Broadcast/multicast traffic
Priority 802.1p, 8 levels mapped to 4 queues
RMON Groups 1-3, 9
SNMP MIB-II, Bridge MIB, RMON MIB, Asanté private MIBs
Console Baud Rate 9600
Password Asante