Asante Technologies 8000 - Manual (Page 124)

Advanced Management
Page 4-34
Current Settings
Table 4-8 describes each setting on the GVRP Port Configuration Menu
screen.
Table 4-8 VLAN Port Configuration Settings
Setting the Port VLAN ID
Port VLAN ID (PVID) is used for VLAN classification of incoming
untagged frames and has meaning only when a port is configured to receive
both untagged and tagged frames. It is used to assign untagged frames to the
VLAN identified by the PVID.
By default, each port on the switch has a PVID of 1 (the default VLAN). The
allowed PVID range is 1 to 4094. For ports that are configured to receive
only tagged frames, the PVID is meaningless and the port is assigned a
PVID of 4095.
Setting Description
Module The IntraCore 8000 module for which the information on the
screen applies.
Port The port for which the information on the screen applies.
Port VLAN Member-
ship Info Shows each VLAN index’s current membership status for this
port.
Port VLAN ID (PVID) This port’s VLAN ID.
Port Frame Type Whether the port currently receives all frames (tagged and
untagged) or only 802.1Q tagged frames.
Gvrp Failed Reg. Count The mumber of times the system has failed to dynamically reg-
ister a VLAN. Failure usually indicates the maximum number
of VLANS has been reached.
Port GVRP Status Whether GVRP is currently enabled or disabled on this port.
Port Ingress Filtering Whether ingress filtering is currently enabled or disabled on
this port.
Gvrp Last Pdu Origin The MAC address of the last Gvrp Pdu that was received.