Asante Technologies 8000 - Manual (Page 121)

VLAN Management
Page 4-31
Current Settings
Table 4-6 describes each setting on the Advance Group Static Configuration
Menu screen.
Table 4-7 VLAN Group Static Configuration Settings
Specifying Tagging or No Tagging for a Port
Each VLAN maintains a list of ports that do not send tagged frames. When
you add a port member to a VLAN, it is added to the untagged set by default.
This means the frames sent out on this port will be untagged.
If you want to ristrict the port to sending only tagged frames on a given
VLAN, you must delete the port from the VLAN’s untagged set.
To delete a port from the untagged set, type d in the Advance Group Static
Configuration Menu. Then enter the module and port description.
To add a port to the VLAN’s untagged set, type a in the Advance Group
Static Configuration Menu. Then enter the module and port description.
Specifying Shared or Independent Address Learning
By default, independent learning of addresses is enabled. Under independent
learning, all addresses learned in a VLAN are stored in an address table for
Setting Description
VLAN Index The VLAN Index of the VLAN group for which the informa-
tion on the screen applies. The index is maintained by the sys-
tem, and is not necessarily the same as the VID.
Port List Shows each port’s current membership status for this VLAN
group.
VID VLAN ID.
FID Filtering ID.
Created By Creator of this VLAN group; either Mgmt or GVRP.
Mgm Access Whether management access is currently enabled or disabled.
Name The name arbitrarily assigned to the VLAN group.
Status Whether the VLAN group is active or inactive, and whether
independent learning or shared learning of addresses is enabled.