Asante Technologies 8000 - Manual (Page 47)

Bootstrap Configuration
Page 3-13
Loading Software Remotely
To set the IntraCore 8000 to download its software over the network from a
remote server, use the following procedure.
1
Open the Local Bootstrap Configuration Menu by typing
b in Configuration Menu.
2
Open the Remote Bootstrap Configuration Menu by typ-
ing r in the Local Bootstrap Configuration Menu. The
menu appears, as shown in Figure 3-7.
Figure 3-7 Remote Bootstrap Configuration Menu
IntraCore 8000 Bootstrap Configuration Menu
Bank 1 Image Version/Date: 1.10J/Dec 7 1999 12:14:38 (Running)
Bank 2 Image Version/Date: 1.00G/May 5 1999 17:32:18
Load Mode: Remote
Boot Mode: TFTP only
Boot Server IP: 192.168.54.150
Boot File Name: c:\base\newcrc.ima
Retry Count: 5
Boot Bank: 1
b Set Boot Mode to BOOTP-TFTP
t Set Boot Mode to TFTP only
l Set Load Mode to LOCAL
s Set Boot Server IP Address
f Set Boot File Name
c Set Remote Boot Retry Count
a Toggle Boot Bank
q Return to Previous Menu
Command>