Asante Technologies 8000 - Manual (Page 61)

Advanced Port Configuration
Page 3-27
Advanced Port Configuration
The Advanced Port Configuration Menu allows you to control the port
broadcast and multicast rate, to enable or disable 802.3x flow control, and to
set the default priority of the port.
To access the Advanced Port Configuration Menu, from the Configuration
Menu, type p to access the System Module Map, then select the module you
want to configure. From the Port Configuration Menu, type a. The Advanced
Port Configuration Menu appears for either 10/100BaseTX or 1000BaseX,
as shown in Figure 3-13 and Figure 3-14.
Advanced 10/100BaseTX Port Configuration
Figure 3-13 Advanced Port Configuration Menu - 10/100BaseTX port
For a legend of the symbols used for the flow control and port priority table,
type h and you will see the screen displayed in Figure 3-11.
IntraCore 8000 Advanced Port Config Menu Module Type: (24-100TX)
Module: [1] Port: [1]
1 8 9 16 17 24
======== ======== ========
Operating Status: +------- -------- --------
Flow Ctrl: *------- -------- --------
Priority: 10001111 11111122 23333333
Max. Broadcast Rate: N/A
Max. Multicast Rate: N/A
802.3x Flow Control: Enabled
Port Default Priority: 1
h Help for legends
r Set Max. Broadcast/Multicast Rate
f Toggle 802.3x Flow Control Enable/Disable
i Set Port Default Priority
q Return to Previous Menu
Command>
Select module Next module Prev module Select port Next port Prev port