Asante Technologies 8000 - Manual (Page 59)

Port Configuration
Page 3-25
The duplex mode is changed immediately, and the change is reflected in the
Link Speed/Duplex line near the top of the Port Configuration Menu.
Configuring 1000BaseX Ports
Because 1000BaseX ports are always in full duplex mode, the only
configuration option for 1000BaseX ports is enabling and disabling the port.
To access the Port Configuration Menu for 1000BaseX ports, type p in the
Configuration Menu. The System Module Map appears, as shown in
Figure 3-9. Enter the number of a module with 1000BaseX ports (such as
module 2 in the map shown in Figure 3-9). The Port Configuration Menu
for 1000BaseX ports appears, as shown in Figure 3-12.
Figure 3-12 Port Configuration Menu for 1000BaseX ports
For a description of the current settings shown in the top portion of the
screen, see “Current Port Settings” on page 3-22.
IntraCore 8000 Basic Port Configuration Menu Module Type: (2-GBIC)
Module: [1] Port: [1]
Port 1 Port 2
=========== ===========
Operating Status: SX-LinkUp (Forwarding) SX-LinkDown
Port Status: Enabled Link Status: Up [1000Mbps-Full]
h Help for legends
t Toggle Port Status Enable/Disable
a Advanced Port Configuration
g Global Port Configuration
q Return to Previous Menu
Command>
Select module Next module Prev module Select port Next port Prev port