Asante Technologies 8000 - Manual (Page 50)

Configuration
Page 3-16
SNMP Configuration
The SNMP Configuration Menu allows you to configure the unit’s read and
write community strings, and to enable or disable authentication traps. This
menu also allows you to specify which of your network management
stations will receive traps from the IntraCore 8000.
The s option in the Configuration Menu displays the SNMP (Simple
Network Management Protocol) Configuration Menu, as shown in Figure 3-
8.
For further details on using SNMP and RMON for remote management of
your network, see Chapter 4, “Advanced Management.”
I Important: Be sure to change the SNMP community
strings in order to prevent unauthorized access to man-
agement information.
Figure 3-8 SNMP Configuration Menu
IntraCore 8000 SNMP Configuration Menu
SNMP Read Community: public
SNMP Write Community: private
Authentication Trap: Enabled
SNMP Trap Receivers:
IP Address Community
1. 192.168.54.150 private
2. 192.168.54.110 Sarah
3.
4.
r Set SNMP Read Community
w Set SNMP Write Communtiy
t Toggle Trap Authentication Enable/Disable
a Add/Update SNMP Trap Receiver
d Delete SNMP Trap Receiver
q Return to Previous Menu
Command>