RADWAG WTB 600/AU Carat Balance - Manual (Page 30)

• Weighing mode is enabled;
• Battery supply is enabled in balance parameters.
Procedure:
After displaying the charge level of batteries (in percentage) the software
returns to weighing.
15.4.2. Battery discharge pictogram
The symbol (bat low) [battery low] switches on when the voltage level
decreases to 18% of the accepted voltage level. In such case change or
charge the batteries/accumulators.
Low level of batteries:
• Pictogram
is visible on the display,
• If the batteries are not exchanged / charged, the balance will switch off
automatically to protect against excessive batteries discharge,
• Charging is signaled by flickering pictogram
(flickering interval is
about 2 seconds) on the display.
15.4.3. Accumulator charging option
This function allows to switch to charging algorithm for NiMH batteries:
- 30 -