RADWAG WTB 600/AU Carat Balance - Manual (Page 17)

12.2. Autozero function
The autozero function has been implemented in order to assure precise
indications of a balance. This function controls and corrects “0” indication.
If enabled, the function continuously compares the results with constant
frequency. If two sequential results differ less than the declared value
of autozero range, then the balance is automatically zeroed and the
pictograms
and appear on the displayed.
When AUTOZERO is disabled zero indication is not corrected
automatically. However, in particular cases, this function can disrupt
the measurement process e.g. slow pouring of liquid or powder on the
weighing pan. In this case, it is advisable to disable the autozero function.
Procedure:
• Enter the submenu and then:
AUTO no - autozero disabled
AUTO YES - autozero enabled
Return to weighing:
See - 11.2.2.
- 17 -