RADWAG WTB 600/AU Carat Balance - Manual (Page 26)

15.1.1. Backlight if supplied from mains
Procedure:
• Enter the submenu and then:
bL no - backlight disabled
bL YES - backlight enabled
bL Auto - backlight disabled automatically if indication is
stable for about 10 seconds
Return to weighing:
See 11.2.2.
Notice:
When bl=Auto, and the indication has not changed for 10s, the backlight
is automatically disabled. The backlight is automatically enabled on change
of mass indication on the display.
15.1.2. Backlight if supplied by batteries
The user can set backlight intensity between 0% to 100%.
The lower the intensity, the longer balance’s operation time without
recharging or exchanging the batteries. When the intensity is set to
zero it functions in AUTO mode (described above).
- 26 -