RADWAG WTB 600/AU Carat Balance - Manual (Page 18)

12.3. Tare function
This parameters enables the user to configure the tare function.
Procedure:
• Enter the submenu and then:
tArA AtAr - automatic tare function enabled and tare value is
stored in balance memory if unplugged from mains
tArA no - Standard tare mode (tarring by pressing key);
tArA tArF - tare memory function – stores last value of tare in
balance memory. It is automatically displayed after
starting the balance. Value of tare is displayed with
minus sign, and there is Net pictogram indicated
on the display.
Return to weighing:
See - 11.2.2.
- 18 -