Start-up – RADWAG WTB 600/AU Carat Balance User Manual
Page 10
G. Install temperature sensor TB-1 of the liquid:
6. START-UP
• After balance unpacking and assembling, the balance has to be
leveled. Use balance’s adjustable feet and the level located on
balance’s overlay to level the balance. Screw adjustable feet in
a way to set the air bubble of the level in its central location.
• Switch on the balance by pressing the
key – press and hold
the key for about 1 sec,
• On switching on, wait until the balance test is completed,
• On test completion, the balance displays zero indication
and the following pictograms:
- 10 -