RADWAG WTB 600/AU Carat Balance - Manual (Page 28)

bEEP no - disabled
bEEP YES - enabled
Return to weighing:
See 11.2.2.
15.3. Automatic switch-off
This function is essential for saving the battery power. The balance’s
display is switched off automatically if (function t1 = YES) no weighing
appears within 5 minutes. (the mass indication does not change on the
display). In case this function disrupts the operation (e.g. long lasting
weighing procedure) or while working with balance plugged to mains, the
function can be disabled.
Operation according to active power supply:
Operation
Setting
Mains Batteries/accumulator
t1 = 0 disabled disabled
t1 = YES enabled enabled
t1 = Auto * disabled enabled
* automatic enabling/disabling according to the source of power.
- 28 -