Winland Electronics EA800-ip - Manual (Page 9)

General Information
D-011-0152 9
Monitoring Screens
The EA800 user interface is menu-based. During normal system monitoring, one of the following three screens is
displayed depending on the current state of the programmed sensors:
The MONITORING (home) screen is displayed
when there are no active alarms. The screen lists
all programmed sensors connected to the console
and their current reading or state.
The MONITORING screen displays pending alarms
in inverse as shown in the example at right
(76% exceeds the humidity limit for Sensor 5, so it
is shown as light text on black). Pending alarms
indicate that the programmed limits for the sensor
have been exceeded, but the sensor’s pro-
grammed delay time has not yet elapsed. If the
monitored conditions continue to exceed the pro-
grammed limits for longer than the programmed
delay period, the pending alarm will become an
active alarm.
The ACTIVE ALARMS screen is shown when one or
more sensors are in an active alarm or warning
state. If more than one alarm is active, each will
be listed on the screen. In the example shown, a
Cooler #1 alarm is occurring.