Winland Electronics EA800-ip - Manual (Page 18)

18 D-011-0152
Sensors
Water Sensors
Table 8 lists the water sensors available for use with the EA800 Alarm System.
Use of water sensors requires that at least one supervised water sensor be used. Up to five additional
unsupervised water sensors may be added in parallel on the same input where the supervised water sensor is
configured.
Multi-Function Sensors
Multi-function wireless sensors may be connected to a wired sensor to act as a transmitter. Table 9 lists the
multi-function sensor available for use with the EA800 Alarm System.
Dry Contact Sensors
Table 10 lists the dry contact sensors compatible for use with the EA800 Alarm System.
14 VDC 10 VDC 22 VDC 18 VDC
15 VDC 11 VDC 23 VDC 19 VDC
16 VDC 12 VDC 24 VDC 20 VDC
17 VDC 13 VDC 25 VDC 21 VDC
18 VDC 14 VDC 26 VDC 22 VDC
Table 8 EA800 Compatible Water Sensors
Sensor Part Number Description
Operating
Range/Parameters
WaterBug ® W-S-S Supervised water sensor 1
1 Water sensors are not effective nor intended for use in distilled or deionized water.
NA
Table 9 EA800 Compatible Multi-Function Sensors
Sensor Part Number Description
Operating
Range/Parameters
Wireless
Multi-Function
EA-WMFS Wireless link for sensors.
Accepted sensors are listed on
page 15
Dependent on sensor
connected
Table 10 EA800 Compatible Dry Contact Sensors
Sensor Description
Normally Open
(N.O.) dry contact
Normally open dry contact such as door contacts, motion detectors, and
glass break sensors
Normally Closed
(N.C.) dry contact
Normally closed dry contact such as door contacts, motion detectors, and
glass break sensors
Power Supplied to EA800
or AUX. Power Out
V
sensor
(max.) [Maximum
sensor voltage rating]
Power Supplied to EA800 or
AUX. Power Out
V
sensor
(max.) [Maximum
sensor voltage rating]