Updating the firmware – Winland Electronics EA800-ip User Manual
Page 50
50
D-011-0152
Updating the Firmware
Updating the Firmware
00.net to your computer, then save it to a USB Flash drive before
performing the procedure for updating the firmware as shown below.
F3
Unlock as shown in “Locking
and Unlocking the EA800”
on page 41
During the process, the
UPDATING
FLASH
screen is displayed.
F3
The EA800 reboots with the new firmware.
If this message appears,
insert the USB drive with
new firmware into the USB
port.
Remove USB drive when
update is complete.
Note:
The file name is limited to 15
characters or less (not includ-
ing the file extension “.UPD”).
File names greater than 15
characters are not supported
and will not be displayed on the
EA800.