Winland Electronics EA800-ip - Manual (Page 38)

38 D-011-0152
Viewing the Event Log
Viewing the Event Log
The EA800 Alarm System logs up to 100 events in its Event Log. At the minimum, the following events are logged:
■ System power on: the date and time when the EA800 was powered on.
■ Sensor added: indicates that a sensor was added.
■ Sensor deleted: indicates that a sensor was deleted.
■ WRM Msg error: indicates that an error message was generated.
■ Firmware updated: indicates that the firmware was upgraded.
■ Alarm log cleared: indicates when the alarm log was cleared.
■ Data log cleared: indicates when the data log was cleared.
Note: Pressing either arrow key will eventually wrap to sequence number 1.
To review the event log, perform the following procedure:
OR
Press arrow keys to scroll up or down
through the logged events.
To return to Active Alarm
or Monitoring screen.