Winland Electronics EA800-ip - Manual (Page 54)

54 D-011-0152
Exporting the Stored Logs
Exported Event Data
The data presented provides the following event information:
Exported Sensor Data
The data is collected from all sensors at the intervals as specified in the Data Collection system setting. Each sensor
is allocated 12 data fields and 12 data fields are provided for all 8 sensors, regardless of how many sensors are
actually connected.
11/22/2011 18:05:00 , 11/22/2011 23:05:00,
1, , 0, , 0, 0, 0, 0, 0, 0, 0, 0,
23, %RH, 0, , 0, 0, 0, 0, 0, 0, 0, 0,
76.3, F, 0.0, , 0, 0, 0, 0, 0, 0, 0, 0,
1, , 0, , 0, 0, 0, 0, 0, 0, 0, 0,
38.1, F, 0.0, 180, 0, 0, 0, 0, 0, 0, 0, 0,
36.3, F, 0.0, 255, 0, 0, 0, 0, 0, 0, 0, 0,
76, F, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0,
24, %RH, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0
■ Blank (,,): The data is null and is not valid for that sensor. For example, the LQI (signal strength) position is null
for wired sensors but shows the LQI value (255) for the wireless sensors. Where wireless sensors are not
installed the LQI is also blank, indicating that no reading is made.
■ 0 (,0,): The data is valid and is valid data for that sensor’s data point.
Date and time of event Event description Code (For Factory Use)
12/24/2011 07:06:03 PM Sensor deleted 1
Date and
time of
reading
UTC Date
and Time
Sensor # 1
CSV1
Reading
CSV2
Unit of
Measure
CVS3
Calibration
Offset
CSV4
LQI
CSV5
Pause
CSV6
Pending
Alarms
CSV7
Low
CSV8
High
CSV9
Comm
CSV10
Fail
CSV11
No Data
CSV12
Low
Battery
11/22/2011
18:05:00 11/22/2011
23:05:00
24 %RH 0 0 Null 0 0 0 0 0 0 0