Winland Electronics EA800-ip - Manual (Page 41)

D-011-0152 41
Maintenance
This chapter contains instructions on performing the following maintenance tasks:
■ Lock/unlock the console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 41
■ Pausing/resuming sensor monitoring . . . . . . . . . . . . . . . . . . . . . . . . . page 42
■ Replacing a sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 43
■ Editing sensor parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 44
■ Deleting a sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 45
■ Change date format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 45
■ Change time format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 46
■ Change the current date or time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 46
■ Change data collection frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . page 46
■ Enabling or disabling the audible alarm buzzer . . . . . . . . . . . . . . . . . page 47
■ Changing the password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 48
■ Clear the alarm log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 49
■ Clear the sensor log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 49
■ Updating the firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 50
■ Saving the configuration to a USB drive . . . . . . . . . . . . . . . . . . . . . . . page 51
■ Loading a configuration from a USB drive . . . . . . . . . . . . . . . . . . . . . page 52
■ Exporting all logs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 53
Note: The console must be unlocked before you can perform any of the maintenance tasks in this chapter.
Locking and Unlocking the EA800
The console is normally locked. When locked, it cannot be programmed and certain maintenance features, such as
PERFORMANCE, cannot be accessed. Locking restricts access to these features to authorized personnel only. If left
unlocked, the console locks automatically after a period of inactivity.
The current state of the EA800 is indicated by the text above the F1 soft key when the home screen is displayed:
■ When UNLOCK is displayed, the console is locked. Press F1, use the PREV and NEXT soft keys to advance the
cursor to the next digit, and use the arrow keys to enter the value for the password. The default password is
0800.
■ When LOCK is displayed: The console is currently unlocked. Press F1 to lock it. The console locks
automatically after 30 minutes of inactivity.
Enter:
0800
F1
F1