Winland Electronics EA800-ip - Manual (Page 53)

Maintenance
D-011-0152 53
Exporting the Stored Logs
You can export the logs stored in the EA800 for archiving or later review. The export procedure exports the alarm
log, data log, and event log files. To export the logfiles perform the following procedure:
The EA800 stores the log files on the USB drive in comma separated value (CSV) format. The files are named in
the format XYYMMDD-HHMMSS.txt where:
■ X = A, E, or D:
• A = Alarm log file
• E = Event log file
• D = Sensor data log file
■ YYMMDD is the current date.
■ HHMMSS is the current time in 24 hour format.
You can rename the files to more easily identify the EA800 system they came from, however, the first character
designating the log type (A, E, or D) must be retained if using the Excel template available at www.ea800.net.
Because the files are in CSV format they can be converted to tables in a word processing program or imported into
a spreadsheet program.
Exported Alarm Data
The data presented provides the following alarm information:
Date and time
of reading
UTC date and
time of
reading
Sensor
Number
Sensor
Name
Sensor
Reading
(at time of
alarm)
Low
Limit
Value
High
Limit
Value
Unit of
Measure
Sensor
Connection
Sensor
Type Code
12/27/2011
01:28:39
12/27/2011
06:28:39
3
Laundry
Room
Wet Dry Dry N/A Wired WaterBug 1
F3
To return to
SELECT SENSOR
screen
To return to home screen.
OR
Unlock as shown in “Locking
and Unlocking the EA800”
on page 41
Appears only if a USB
drive is not installed
The screen displays
the progress of the
data export. Remove
USB drive when
export is complete.