Accton Technology ES5508 - Manual (Page 410)

Command Line Interface
4-198
4
IGMP Snooping Commands
ip igmp snooping
This command enables IGMP snooping on this switch. Use the no form to disable it.
Syntax
[no] ip igmp snooping
Default Setting
Enabled
Command Mode
Global Configuration
Example
The following example enables IGMP snooping.
ip igmp snooping vlan static
This command adds a port to a multicast group. Use the no form to remove the port.
Syntax
[no] ip igmp snooping vlan vlan-id static ip-address interface
• vlan-id - VLAN ID (Range: 1-4094)
• ip-address - IP address for multicast group
• interface
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-8)
• port-channel channel-id (Range: 1-4)
Default Setting
None
Command Mode
Global Configuration
Table 4-69 IGMP Snooping Commands
Command Function Mode Page
ip igmp snooping Enables IGMP snooping GC 4-198
ip igmp snooping vlan static Adds an interface as a member of a multicast group GC 4-198
ip igmp snooping version Configures the IGMP version for snooping GC 4-199
show ip igmp snooping Shows the IGMP snooping and query configuration PE 4-199
show mac-address-table
multicast
Shows the IGMP snooping MAC multicast list PE 4-200
Console(config)#ip igmp snooping
Console(config)#