Figure 3-95, Igmp configuration, Configuring the switch 3-162 – Accton Technology ES5508 User Manual
Page 202
Configuring the Switch
3-162
3
Web – Click IGMP Snooping, IGMP Configuration. Adjust the IGMP settings as
required, and then click Apply. (The default settings are shown below.)
Figure 3-95 IGMP Configuration
CLI – This example modifies the settings for multicast filtering, and then displays the
current status.
Console(config)#ip igmp snooping
Console(config)#ip igmp snooping querier
Console(config)#ip igmp snooping query-count 10
Console(config)#ip igmp snooping query-interval 100
Console(config)#ip igmp snooping query-max-response-time 20
Console(config)#ip igmp snooping query-time-out 300
Console(config)#ip igmp snooping version 2
Console(config)#exit
Console#show ip igmp snooping
Service status:
Enabled
Querier status:
Enabled
Query count:
10
Query interval:
100 sec
Query max response time: 20 sec
Router port expire time: 300 sec
IGMP snooping version:
Version 2
Console#