Show port monitor – Accton Technology ES5508 User Manual
Page 347
Mirror Port Commands
4-135
4
Example
The following example configures the switch to mirror all packets from port 6 to 8:
show port monitor
This command displays mirror information.
Syntax
show port monitor [interface]
interface - ethernet unit/port (source port)
• unit - This is unit 1.
• port - Port number. (Range: 1-8)
Default Setting
Shows all sessions.
Command Mode
Privileged Exec
Command Usage
This command displays the currently configured source port, destination port,
and mirror mode (i.e., RX, TX, RX/TX).
Example
The following shows mirroring configured from port 6 to port 11:
Console(config)#interface ethernet 1/8
Console(config-if)#port monitor ethernet 1/6 both
Console(config-if)#
Console(config)#interface ethernet 1/11
Console(config-if)#port monitor ethernet 1/6
Console(config-if)#end
Console#show port monitor
Port Mirroring
-------------------------------------
Destination Port (listen port): Eth1/ 8
Source Port (monitored port):
Eth1/ 6
Mode
:RX/TX
Console#