Accton Technology ES5508 - Manual (Page 343)

Interface Commands
4-131
4
Default Setting
Shows the status for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see “Displaying
Connection Status” on page 3-85.
Example
show interfaces counters
This command displays interface statistics.
Syntax
show interfaces counters [interface]
interface
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-8)
• port-channel channel-id (Range: 1-4)
Default Setting
Shows the counters for all interfaces.
Console#show interfaces status ethernet 1/5
Information of Eth 1/5
Basic Information:
Port Type: 10G
Mac Address: 00-0C-DB-21-11-3B
Configuration:
Name:
Port Admin:
Up
Speed-duplex: 10G full
Capabilities:
Broadcast Storm:
Enabled
Broadcast Storm Limit: 1042 packets/second
LACP: Disabled
Port Security: Disabled
Max MAC Count: 0
Port Security Action: None
Media Type: None
Current Status:
Link Status: Up
Port Operation Status: Up
Operation Speed-duplex: 10G full
Console#show interfaces status vlan 1
Information of VLAN 1
MAC Address:
00-0C-DB-21-11-33
Console#