Table 4-45, Show interfaces switchport - display description – Accton Technology ES5508 User Manual
Page 345
Interface Commands
4-133
4
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Example
This example shows the configuration setting for port 4.
Console#show interfaces switchport ethernet 1/4
Broadcast Threshold:
Enabled, 1042 packets/second
LACP Status:
Disabled
Ingress Rate Limit:
Disabled, 10000M bits per second
Egress Rate Limit:
Disabled, 10000M bits per second
VLAN Membership Mode:
Hybrid
Ingress Rule:
Disabled
Acceptable Frame Type:
All frames
Native VLAN:
1
Priority for Untagged Traffic: 0
GVRP Status:
Disabled
Allowed VLAN:
1(u),
Forbidden VLAN:
Console#
Table 4-45 show interfaces switchport - display description
Field
Description
Broadcast threshold
Shows if broadcast storm suppression is enabled or disabled; if enabled it also
shows the threshold level (page 4-129).
LACP status
Shows if Link Aggregation Control Protocol has been enabled or disabled
Ingress/Egress rate limit
Shows if rate limiting is enabled, and the current rate limit (page 4-136).
VLAN membership mode Indicates membership mode as Trunk or Hybrid (page 4-171).
Ingress rule
Shows if ingress filtering is enabled or disabled (page 4-172).
Acceptable frame type
Shows if acceptable VLAN frames include all types or tagged frames only
Native VLAN
Indicates the default Port VLAN ID (page 4-173).
Priority for untagged traffic Indicates the default priority for untagged frames (page 4-185).
GVRP status
Shows if GARP VLAN Registration Protocol is enabled or disabled
Allowed VLAN
Shows the VLANs this interface has joined, where “(u)” indicates untagged and
“(t)” indicates tagged (page 4-174).
Forbidden VLAN
Shows the VLANs this interface can not dynamically join via GVRP