Nilfisk-ALTO 2000 - Manual (Page 22)

AMERICAN-LINCOLN TECHNOLOGY 1 - 21
SMART 2000
MAIN BROOM COMPARTMENT DOOR (See Figure 20)
The main broom compartment door is located in front of the left side tire of the machine. The door provide
access to the main broom for service or inspection. The hopper must be raised to access.
WARNING
Engage hopper safety arm while accessing the main
broom.
HOPPER LIFT SWITCH (See Figure 21)
The hopper lift switch is located on the operator’s
compartment console. The switch controls the operation
of the hopper lift system.
To raise the hopper for dumping, press and hold the
upper portion of the switch until the hopper reaches the
desired height or a ratcheting sound is heard, then
release.
NOTE
While the hopper is open a chime will ring letting the
operator know it is open. The chime will stop when the
hopper is completely closed.
To close the hopper press in and hold the lower portion of
the switch until the hopper closes completely (chime wil
turn off) then release.
Figure 20
Figure 21
OPERATION OF CONTROLS AND GAUGES - Cont.