Nilfisk-ALTO 2000 - Manual (Page 14)

AMERICAN-LINCOLN TECHNOLOGY 1 - 13
SMART 2000
WARNING
To prevent injury and damage to the machine, do not lift the machine or move it to an edge of a stair or loading
dock.
WARNING
Lead acid batteries generate gases which can cause an explosion. Keep sparks and flames away from batteries.
NO SMOKING. Charge batteries only in areas with good ventilation.
WARNING
Always wear eye protection and protective clothing when working near batteries. Remove all jewelry. Do not put
tools or other metal objects across the battery terminals or across the tops of batteries.
WARNING
Maintenance and repairs must be done by authorized personnel only. Tighten all fasteners. Maintain adjustments
according to the specifications given in the service manual for the machine. Keep the electrical parts of the
machine dry. For storage, keep the machine in a building.
WARNING
Make sure all labels, decals, warnings, cautions and instructions are fastened to the machine. Purchase new
labels and decals from American-Lincoln Technology.
WARNING
The operator must exhibit extreme caution when negotiating, turning, and traveling across grades or ramps. Start,
stop, change direction, travel and brake smoothly. Slow down when turning.
WARNING
Avoid uneven surfaces and loose materials. Watch for obstructions, especially overhead.
WARNING
Operate only from the designated operator’s position. Stay inside the body of the machine. Keep hands and feet
on the designated controls. Always operate in well lighted areas.
WARNING
Do not carry passengers on the machine. Set the Wheel Lock when leaving the machine. Chock (block) the
wheels if the machine is parked on a grade (ramp), or is being prepared for Maintenance.
WARNING
Never leave the operator’s compartment when the is engine running.
WARNING
Report damage or faulty operation immediately. Do not operate the machine until repairs have been completed.
Maintenance and repairs must be done by authorized
personnel only.
WARNING
To maintain the stability of this machine in normal operation, the overhead guard, counterweights, roller bumper
guards, or any similar equipment installed by the manufacturer as original equipment should never be removed. If
it becomes necessary to remove such equipment for repair or maintenance, this equipment must be reinstalled
before the machine is placed back into operation.
WARNING
Electrical hazard. Shocks can cause serious personal injury. Unplug the battery before cleaning or servicing. To
avoid possible injury or property damage, read the Operator’s Manual before servicing the machine. Maintenance
and repair must be done by authorized personnel.
WARNING
Disconnecting the battery connector with the key switch in the “I” position will cause sparks that could ignite
explosive hydrogen gas generated by the batteries. To prevent serious injury or possible property damage, turn
Key Switch to “O” position before disconnecting the battery cable from the machine for charging or service.
SAFETY INSTRUCTIONS