Allied Telesis AT-WR4500 - Manual (Page 80)

80 AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
RouterOS v3 Configuration and User Guide
Example
To group ether1 and ether2 in the already created bridge1 bridge (versions from 2.9.9):
[admin@AT-WR4562] interface bridge port> add interface=ether1 bridge=bridge1
[admin@AT-WR4562] interface bridge port> add interface=ether2 bridge=bridge1
[admin@AT-WR4562] interface bridge port> print
# INTERFACE BRIDGE PRIORITY PATH-COST
0 ether1 bridge1 128 10
1 ether2 bridge1 128 10
[admin@AT-WR4562] interface bridge port>
Note that there is no wlan1 interface anymore, as it is not added as bridge port
4.5.4
Bridge Monitoring
Command name: /interface bridge monitor
Description
Used to monitor the current status of a bridge.
Property Description
current-mac-address (MAC address) - MAC address currently assigned to the bridge
root-bridge (yes ! no) – if this bridge is the root bridge
root-bridge-id (text) - the bridge ID, which is in form of bridge-priority.bridge-MAC-address
root-path-cost (integer) - the total cost of the path to the root-bridge
root-port (name) - port to which the root bridge is connected to
Example
To monitor a bridge:
[admin@AT-WR4562] interface bridge> monitor bridge1
state: enabled
current-mac-address: 00:0D:B9:12:B3:F8
root-bridge: yes
root-bridge-id: 0x8000.00:00:00:00:00:00
root-path-cost: 0
root-port: none
port-count: 2
designated-port-count: 0
[admin@AT-WR4562] interface bridge>
4.5.5
Bridge Port Monitoring
Command name: /interface bridge port monitor
Description
Statistics of an interface that belongs to a bridge