Allied Telesis AT-WR4500 - Manual (Page 148)

148 AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
RouterOS v3 Configuration and User Guide
Example
To add user joe with password j1o2e3 belonging to write group, enter the following command:
[admin@AT-WR4562] user> add name=joe password=j1o2e3 group=write
[admin@AT-WR4562] user> print
Flags: X - disabled
0 ;;; system default user
name="admin" group=full address=0.0.0.0/0
1 name="joe" group=write address=0.0.0.0/0
[admin@AT-WR4562] user>
7.3.4
Monitoring Active Router Users
Command name: /user active print
Description
This command shows the currently active users along with respective statisics information.
Property Description
address (read-only: IP address) - host IP address from which the user is accessing the router
0.0.0.0 - the user is logged in locally from the console
name (read-only: name) - user name
radius (read-only: flag) - the user has been authenticated through a RADIUS server
via (read-only: console | telnet | ssh | winbox) - user's access method
console - user is logged in locally
telnet - user is logged in remotely via telnet
ssh - user is logged in remotely via secure shell protocol
winbox - user is logged in remotely via WinBox tool
when (read-only: date) - log in date and time
Example
To print currently active users, enter the following command:
[admin@rb13] user> active print
Flags: R - radius
# WHEN NAME ADDRESS
VIA
0 feb/27/2004 00:41:41 admin 1.1.1.200
ssh
1 feb/27/2004 01:22:34 admin 1.1.1.200
winbox
[admin@rb13] user>
7.3.5
Router User Remote AAA
Submenu level: /user aaa
Description
Router user remote AAA enables router user authentication and accounting via RADIUS server.
Property Description
accounting (yes | no; default: yes) - specifies whether to use RADIUS accounting
default-group (name; default: read) - user group used by default for users authenticated via RADIUS
server
interim-update (time; default: 0s) - RADIUS Interim-Update interval