Allied Telesis AT-WR4500 - Manual (Page 144)

144 AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
RouterOS v3 Configuration and User Guide
routes (text) - routes that appear on the server when the client is connected. The route format is: dst-
address [[gateway] [metric]] (for example, 10.1.0.0/24 10.0.0.1 1). Several routes may be specified
separated with commas. If gateway is not specified, the remote address is used. If metric is not
speciefied, the metric of 1 is used
service (any | async | l2tp | ovpn | pppoe | pptp; default: any) - specifies the services available to a
particular user
Example
To add the user ex with password lkjrht and profile ex available for PPTP service only, enter the
following command:
[admin@rb13] ppp secret> add name=ex password=lkjrht service=pptp profile=ex
[admin@rb13] ppp secret> print
Flags: X - disabled
# NAME SERVICE CALLER-ID PASSWORD PROFILE REMOTE-ADDRESS
0 ex pptp lkjrht ex 0.0.0.0
[admin@rb13] ppp secret>
7.2.4
Monitoring Active PPP Users
Command name: /ppp active print
Property Description
address (read-only: IP address) - IP address the client got from the server
bytes (read-only: integer/integer) - amount of bytes transfered through this connection. First figure
represents amount of transmitted traffic from the router's point of view, while the second one shows
amount of received traffic
caller-id (read-only: text) - for PPTP and L2TP it is the IP address the client connected from. For
PPPoE it is the MAC address the client connected from. For ISDN it is the caller's number the client
dialed-in from
"" - no restrictions on where clients may connect from
encoding (read-only: text) - shows encryption and encoding (separated with '/' if asymmetric) being used
in this connection
limit-bytes-in (read-only: integer) - maximal amount of bytes the user is allowed to send to the router
limit-bytes-out (read-only: integer) - maximal amount of bytes the router is allowed to send to the client
name (read-only: name) - user name supplied at authentication stage
packets (read-only: integer/integer) - amount of packets transfered through tis connection. First figure
represents amount of transmitted traffic from the router's point of view, while the second one shows
amount of received traffic
service (read-only: async | l2tp | ovpn | pppoe | pptp) - the type of service the user is using
session-id (read-only: text) - shows unique client identifier
uptime (read-only: time) - user's uptime
Example
[admin@rb13] > /ppp active print
Flags: R - radius
# NAME SERVICE CALLER-ID ADDRESS UPTIME ENCODING
0 ex pptp 10.0.11.12 10.0.0.254 1m16s MPPE128...
[admin@rb13] > /ppp active print detail
Flags: R - radius
0 name="ex" service=pptp caller-id="10.0.11.12" address=10.0.0.254
uptime=1m22s encoding="MPPE128 stateless" session-id=0x8180002B
limit-bytes-in=200000000 limit-bytes-out=0
[admin@rb13] > /ppp active print stats
Flags: R - radius
# NAME BYTES PACKETS
0 ex 10510/159690614 187/210257
[admin@rb13] >