Allied Telesis AT-WR4500 - Manual (Page 20)

20 AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
RouterOS v3 Configuration and User Guide
It is impossible to import the whole router configuration using this feature. It can only be used to import
a part of configuration (for example, firewall rules) in order to spare you some typing.
Command Description
file=[filename] - loads the exported configuration from a file to router
Example
To load the saved export file use the following command:
[admin@AT-WR4562] > import address.rsc
Opening script file address.rsc
Script file loaded successfully
[admin@AT-WR4562] >
3.1.4
Configuration Reset
Command name: /system reset
Description
The command clears all configuration of the router and sets it to the default including the login name and
password ('admin' and no password), IP addresses and other configuration is erased, interfaces will
become disabled. After the reset command router will reboot.
Command Description
reset - erases router's configuration
If the router has been installed using netinstall and had a script specified as the initial configuration, the
reset command executes this script after purging the configuration. To stop it doing so, you will have to
reinstall the router.
Example
[admin@AT-WR4562] > system reset
Dangerous! Reset anyway? [y/N]: n
action cancelled
[admin@AT-WR4562] >
3.2 Software Version Management
Document revision: 1.4 (Tue Oct 18 12:24:5 7 G MT 200 5)
Applies to: V2.9
3.2.1
General Information
Summary
To upgrade RouterOS to a more recent version, you can simply transfer the packages to router via ftp,
using the binary transfer mode, and then just rebooting the router.
This manual discusses a more advanced method how to upgrade a router automatically. If you have more
than one router then this can be useful.
Specifications
Packages required: system
License required: Level1
Submenu level: /system upgrade